Create your own Web page to Flicker Compare a set of your images

This Web site is used to create your own Flicker Compare Web page of specific images and description of those images. The images (GIF or JPEG) must reside on your Web (HTTP) or FTP server. The generated Web page will let users select exactly two images to flicker and then will start Flicker on those images. After the created Web page is created by press GENERATE WEB PAGE after filling in the form you should save it for your own use on your web server.

The generated Web page can be used to select a pair of images for Flicker Comparison. You can see some examples of biomedical problem domain specific Flicker-Compare Web pages on the Flicker home page.

Notice:
Because of resource limitations, the NCI Flicker Server is to be used only for scientific data.

1. Instructions
2. Data Entry Form
2.1 Enter data about your organization
2.2 Enter data about your problem domain
2.3 Generate the Web page

1. Instructions

Please enter data into the data entry form below. You must enter data into all required fields (indicated by magenta). Optional fields are indicated by the "(opt.)" prefix. If you don't fill in all of the required fields, it will prompt you to backup, fill in the missing fields and try to generate the web page again.

You must fill in text for the Introduction section which describes your project. In addition you may also optionally include text which for the optional Materials And Methods, Discussion, and Summary sections. Don't enter any text in these sections if you do not want to use them.

In the created Web page, there are several ways to generate the selection of the two images. At the time you generate the Web page, you can specify how you want this selection to be made. You may have one or two scrollable URL lists, or one or two text-inputs to type in the URLs or a combination of both. You specify this here by setting the radio button below to one of the following ( see 2.2.5 below):

  o   2 URL selection lists
  o   2 URL selection lists & 2 text-input for URL
  o   2 URL selection lists & 1 text-input for URL
  o   1 selection list of URLs & 1 text-input for URL
  o   2 text-input for URL for URL

2. Data Entry Form

2.1 Enter data about your organization for inclusion on the generated Web page

2.1.1 Your Name for generated Web Page

2.1.2 Your Organization for generated Web Page

(Opt.) 2.1.3 Your mailing address for generated Web Page

2.1.4 Your E-mail for generated Web Page

(Opt.) 2.1.5 Your Web site URL for generated Web Page

(Opt.) 2.1.6 Your Phone-Nbr for generated Web Page

(Opt.) 2.1.7 Your FAX-Nbr for generated Web Page

(Opt.) 2.1.8 Your Web Server base address if you will be setting up a complete Flicker Web server instead of only getting the gel images from your Web server. This is used only if you want to generate a home page which expects to invoke Flicker from your server instead of from the NCI Flicker Server. You will need to install some additional programs on your server - read the Flicker API document on how to set up your own Flicker server. Contact lemkin@ncifcrf.gov for more details.
For example, the Web server for the default Flicker web server http://www-lecb.ncifcrf.gov/flicker/ is http://www-lecb.ncifcrf.gov/.

2.2 Enter data about your problem domain for inclusion on the generated Web page

2.2.1 Title for generated Web Page

2.2.2 Introduction for generated Web Page

2.2.3 List of URLs (1/line) for generated Web Page. You must have a least two.
Eg.

   http://www.anl.gov/CMB/PMG/imgmaps/hbreast/hbreast96_diff.gif
   http://www.anl.gov/CMB/PMG/imgmaps/hbreast/hbreast96_identified.gif
or
   http://www.yourserver.org/gif/abc.gif - comments about image abc
or
If you running a local Flicker server with a "htdocs/flicker/"
directory, you can specify just the file names (without .gif 
extensions) as:
   abc - comments about abc
   xyz - comments about xyz
etc.

(Opt.) 2.2.4 Add a list of images at the end of the document

2.2.5 Specify types of list(s) to generate for Web Page
2 URL selection lists & 1 text-input for URL
2 URL selection lists
2 URL selection lists & 2 text-input for URL
1 selection list of URLs & 1 text-input for URL
2 text-input for URL for URL

(Opt.) 2.2.6 Materials and Methods (separate each by a blank line) for generated Web Page

(Opt.) 2.2.7 Discussion for generated Web Page

(Opt.) 2.2.8 Summary for generated Web Pag

(Opt.) 2.2.9 List of References (separate each by a blank line). Eg.

Giometti CS, etal. (1995) 
Electrophoresis 16, 1215-1224.

Giometti CS, etal.(1997) 
Electrophoresis, 18, 573-581.

2.3 Press "GENERATE WEB PAGE" to generate the Web page

After you have completed filling in the above data entry form fields you are now ready to generate the Web page.

Make all text in Introduction, Materials And Methods, Discussion, and the Summary sections in the generated Web page have double columns (when viewed with Netscape). The default is single column.

When generated, you should use your Web Browser's "SAVE AS" option in the FILE menu to save the new Web page (save it as Source or HTML). Then install it on your Web server by copying it in your Web server and run it.

NOTE: this will clear all entries in the above form - ARE YOUR SURE you want to do this?